Friday, July 3, 2015

Adding a Headboard to the Headboard

I am a big believer that you should never tackle a project unless it solves a problem.  Seriously.  I am lazy like that.  And yes, sometimes the problem is that you are bored and your project fills that craving for creativity….unless you have four kids and then, you are probably thinking WHATEVER MY PROJECT IS A NAP.

Preach my friend.  Preach.  Naps are my version of a date night.  Complete with Barry White music.  (I almost typed Barry Manilow there….totally different vibe.  Definitely not nap music.)

Okay….so if you recall, we constructed the beds for the boys a while back.  Click here to read that old post.  They were originally bunk beds that we found in the trash and needed some tweaking to make functional.  The problem with bunk beds is that the headboard and the footboard are usually the same height.  We even added “finials” to the headboard portion of the boys bed but as you can see below…their pillows could go right over the top of the headboard rail.  I wanted a proper headboard so that they didn’t find themselves pushing against the window or falling off the end.

I figured that a 3/4″ thick piece of plywood would solve that problem.  We bought one sheet of 4×8 plywood and decided on a simple design that we could add to the existing headboard to make it more ‘headboardy’.   That is a legit word.  It’s too legit to quit.  yay.  yay.

I started by measuring and marking the height and width I needed.

Then to make it a smidge more interesting than just square, I decided to do a round cut out on both corners.  That was achieved by marking 10″ over and 10″ down from each corner….then I used a rounded pot to make the curve.

Cutting them out was super simple.

I wish I was better with the jigsaw.  I think I might practice on some scraps and do some fun designs.

Anyhooo….I cut out the boards and then sanded them lightly.

Since this was plywood, it was important to use edge banding to make it look like a solid piece of wood.  We have an old iron that we use for this type of thing but if you don’t have one, I would definitely suggest using a piece of parchment paper to protect your iron.

After the edge banding was on the exposed edges, I sanded them all down really well (that is the key to edge banding….a good sanding to blend it in) and prepped the boards for paint.

I wasn’t in the mood to repaint the entire beds so I decided that I would just use the same paint that I used for the rest of them to make the headboards look like they had been there all along.

The color is Hale Navy by Benjamin Moore.

Okay…so I had the paint can on the edge of my makeshift workspace….just like this….

And Weston walks over, moves the brush off and takes the entire paint can and dumps it on his chest.  I’m not even kidding.  It was like a game to him.  He dumped it right smack dab in the center of his plaid overalls (it was a very cute outfit by the way) and it poured down his front into a giant puddle and he started smearing it around with his foot.  Paint problems for the boys room = 2.

Next came installation.  Since the existing headboards already had a brace across the back, we decided that the best way to attach the new headboards would be screwing them directly into the existing brace.

The boys had wrestle mania while daddy worked.

Poor LJ.  Weston is constantly trying to sit on his head.

Jeremy used a couple dark screws and it was super simple.

They are low enough and dark enough that you can’t really see them at all unless you are really close.

Oh and I wanted to show you the edge banding all painted up.  Looks good right!?

So here is the finished product.  Totally high enough to act like a real headboard but looks like it’s been there all along because of the color and the round corner cut outs.

Oh and just so you can see what it looks like ‘in-use’….here is a picture of how high it looks when the pillows are in normal sleep mode….or when tummy time is in session :)

So there you have it…the new boys headboards.  The best part is that if we change our minds or the boys want bunk beds down the line, we can remove the four screws and stack them back up.  Easy peasy!

Wednesday, July 1, 2015

Costume Boxes for Boys

One of the best pieces in the boy’s room is the little stackable storage cubbies that I scored for a big discount.  They were a thrift store find and still had the Pottery Barn Kid’s price tags on them.  I got them for $30 a piece…making the purchase for all four pieces $120….and the original price was well over $700.  They were in used condition (close to something you would find at the outlet) but obviously anything that you put in a kid’s room, you should expect to get well-worn.  I’ve had to teach myself to not get too attached because ALL THE TEARS should not be over furniture.  The only problem I had with the storage cubbies was the bottom two deeper big cubbies….regular baskets (aka cheap baskets from Walmart or Hobby Lobby) would not fit down there and I was not about to spend $30 a basket online.  It just became a place to throw spare books and randoms.

Well, now I am happy to announce that the bigger cubbies have two very fun costume boxes.

Side note…have you noticed on Pinterest how almost all the costume storage solutions are princessy and pink and ballerina-y?  My boys just haven’t gotten into that.  They want to be “Dark Vader” and “Skeltiens” and “Super-reros”.  And I am all about costumes…so obviously I needed a designated costume box for the boy’s costumes and masks and weaponry.

This journey for costume boxes began a VERY long time ago….like right after LJ was born.  We started by building the boxes out of 1/2″ plywood.

The assembly was pretty simple….four sides with a bottom laid on the inside.

glue…

and brad nail together.  (note that this picture was taken ten days after LJ was born….sometimes these projects take us a long time!)

There is my little LJ!  So small that he fit in the box!  Also….Max wore those jammies last night :)

I painted the insides white and primed the outsides before putting on a coat of Benjamin Moore’s Hale Navy paint.

Once the outside was done, I really wanted to add a cool textural element to the fronts.

I cut out a scrap 1×1 to make these little squares and sanded them all down before adding them to the front.

The effect looked really great….I loved it….up until the squares started falling off.

It was so frustrating.  I tried a bunch of different glues and should have just brad nailed them on….but then I realized that they would probably crack if I tried to pre drill for handles….so I ended up scrapping the entire idea and went another route.  I still think this is a cool effect though…I definitely want to use it somewhere else…

So rewind back to the regular boxes….ready for a cool front effect….

I decided that different widths of scrap lumber would be cool too….

Laid them out on top for a pattern alternating fat and skinny…

And then traced the box onto the boards….

Once I had my cut lines, it was relatively simple….

cut the boards on the lines…. (picture taken in January when I didn’t know I was pregnant!)

glue and brad nail in place….

Then I sanded all the edges and stained the boards Rustoleum’s Dark Walnut.

Then came my favorite part….the knobs!

I saw these at Hobby Lobby for $3 a piece and knew that Will was going to FLIP HIS LID when he saw them.

Predrilling action…

Doing a little touch-ups on the edge where I got too excited about the staining process….

And then came time for making the bottoms slide-able on the wood bases.  I used fleece that I could just cut to size.

Once I laid the fleece out and trimmed the excess, it was ready to be adhered.

Spray adhesive on…

Fleece ready to be rolled on….

Placed the edge on first and then gently rolled it over to the opposite edge.

Smooth and press firmly!  This was actually the easiest part of the project and it makes the ‘drawers’ more like drawers on a slide….but with no drilling or hardware required.

The knobs are so awesome, right?!  I love Hobby Lobby for hardware.  I think they are on sale almost all the time and the variety is great.  These are big enough that if you wanted to make a coat hook out of them, they would work for that too.

The boy’s stuff fits really well….even the big stuff like Ninja Turtle shells and Captain America shields!

And they are easy to slide in and out.  Will and Weston can both do it.  We purposely made these boxes a little small (we left an inch clearance on each side instead of making it a tight fit) because we wanted to make it easy for the boys to push these in without banging up the sides.

Overall…they are a really great addition to the boy’s room….

I feel like the biggest challenge with kid’s spaces is just finding ways to store their stuff.  It’s always awkward or super colorful or plastic or has a million pieces.  It’s almost like you get a bunch of stuff for them and then you have to figure out how to store/keep/make it accessible.  It’s a challenge for sure!

So that is our boy costume boxes and how we built them….do your kids get into costumes on the daily or is it more of a Halloween only thing?  I know my family loves costumed play growing up….my sister and I were constantly playing with mom’s old clothes from the 60’s or being cheetah girl or SheRa!  I wonder if that is a genetic thing?!

Zack’s Closet Update + HomeRight Giveaway

Many times, there are projects that we have to do around our home that aren’t particularly jaw dropping, like cleaning the garage or reorganizing the Tupperware cabinet. They are necessary evils that don’t exactly have that “Wow!” factor when it’s time to blog about them. Today, I have one of those projects to share with you.

That's the "before" from Zack's closet. It was horribly laid out by the builder, so I needed to do something completely different for all of his stuff. The after is pretty great.

Come on over to the blog and see what it looks like now - and enter for a chance to win a HomeRight prize. Click here to go there now.